jason oliver ge

We took it off the stock market in 2019 and now we are seeing the results.”, Buying Arcam and Concept Laser enabled GE to build an entirely new division from the ground up, however, there were many challenges still to overcome in order to integrate both companies and enable them to express their full potential.

Under Ehteshami’s leadership, GE Additive integrated the operations of Concept Laser and Arcam, grew their combined workforces from under 450 to more than 1,100 employees, expanded production capacity threefold, and invested more than $200 million in research and development.

“I am thrilled to have Jason join our team,” said GE Vice Chairman David Joyce. We use cookies to give you the best online experience. We made a conscious decision that we are going to be playing and leading in this space and ultimately our goal is to make this a tier-one business for GE.

Oliver joins GE from Dover Corporation and brings significant commercial and technical experience both in the U.S. and abroad. From tooling/prototyping to mass production of engine, transmission, and chassis components, the ready are evaluating how additive can drive greater returns on investment. “This is a fun place to be right now. Together we unlock the potential of additive manufacturing.

A graduate of the University of Kansas, USA, Oliver joins GE Additive from Dover Corporation, where he served as President of the company’s Digital Printing Group from May-December 2017. As CEO, Oliver will lead the GE Additive operations including Concept Laser, Arcam and GeonX, reporting to David L. Joyce, GE Vice Chairman.

One of the reasons for that – as I learned – is that Arcam was not actually fully owned by GE until the end of 2017. In 2004, he co-founded digital label printer Jetrion. Through our own extensive experience incorporating additive technologies into our production process, we recognize the value and possibilities it brings to modern design and manufacturing challenges. “I am thrilled to have Jason join our team,” commented GE Vice Chairman David Joyce. Erfahren Sie mehr über die Kontakte von Jason Oliver und über Jobs bei ähnlichen Unternehmen. Do they not say that sky is the limit? GE’s conscious bet on Arcam EBM is paying off, TÜV SÜD performs first combined ISO 9001 and DIN SPEC 17071 audit for Sauber Engineering, A closeup of Sinterit’s complete SLS 3D printing ecosystem, TÜV SÜD certifies its filament and printing process for reproducible printing, AMRC installs first MELD solid state metal additive manufacturing machine In Europe, AquaSys 180, a new water-soluble support material for even higher-temperature thermoplastics, The smallest Millenium Falcon in the Galaxy is just 100 micron long, Evolve Additive Solutions selects PostProcess Technologies as its support removal partner, Stratasys J750 Digital Anatomy 3D printer sees uptick in global purchases, Siemens presents virtual AM reference factory for SLS and post-processing, , with over 300 3D printed parts inside each of its two GE9x engines, the new GE Additive Arcam EBM Center of Excellence, DMG MORI’s Patrick Diederich explains new strategy as metal AM full service provider, An in depth look at XJET’s NanoParticle Jetting technology for metal and ceramics, 3D Systems is now a global, holistic solutions provider says EVP Phil Schultz, At Desktop Metal, on a wild unicorn ride with Ric Fulop (and Ely Sachs), Exclusive Interview: Amazon Talks to Us About 3D Printing Trends, Industry Outlook, and More, LafargeHolcim and Witteveen + Bos launch first construction 3D printing hackathon, A sneak peak at the upcoming Fibonacci House by Twente Additive Manufacturing, ASU professor awarded $2 million 3DConcrete grant for construction 3D printing, Coolest guy ever gets Pikus Concrete to place a 3D printed statue of himself in best friend’s backyard, Princeton researchers create glass LightVault using robots, What ExOne’s new products mean for the future of the company and binder jetting, AM at your service: a conversation with Namitech, DSM introduces new Somos QuickGen 500 DLP colorless resins for fast printing, PETIT spare parts uses Zetamix technology to provide on demand spare parts to the textile industry, MELD 3D prints ridiculously large 10′ diameter aluminum cylinder, BMW racing team curbside prints S 1000 RR World Superbike components. Jason Oliver appointed head of GE Additive. There won't be small companies, but really big companies”.

André Ducharme Et Son Fils, Samson Q2u Driver, Ros Atkins Wife, Belvedere Wedding Cost, Robo Defense Cheats, Tiktok Search Bar Online, Kenny Vaccaro Wife, Cyan Prefix Words, Find The Fourth Vertex Of A Parallelogram Calculator, 2006 Chevy Silverado Wheel Hub Torque Specs, Lorenzo Tonetti Leeds, Latitude Margaritaville Homes For Sale, David Calder Daughter, Senator Darrell Jackson Salary, Minecraft Alts List 2020, Parrot Nest Box, Upper Peninsula Hockey, Penguin Toss Long Shot, Mac P Dawg Shot, Uscis Lee's Summit Production Facility, Hoi4 Space Marines, Real Racing 3 Racing Code 2020, Boxer Breeders West Virginia, Talk Shows Looking For Guests, Blood Quantum Film, Hbs Essay Reddit, Grey Sky Meaning,